Microheli Hardware set for MH 130X Upgrades

The Hardware set for Microheli Frame 130 X Upgrades is very strong & light.  This design keeps the Microheli Frame 130 X very close to the Motor, to maintain stock flying characteristics.  With a good quality Hardware set, it will give you the confidence needed for worry free flying.

Each Hardware will be self tightening while the Motor is powered. Installation is quick & simple. No modifications necessary.

	Includes
	5 x M1x2mm Phillips Head Screw M1020PSS
	10 x M1x3mm Phillips Head Screw M1030PSS
	6 x M1.2x2mm Phillips Head Screw M1220PSS
	10 x M1.2x3mm Phillips Head Screw M1230PSS
	4 x M1.2x5mm Phillips Head Screw M1250PSS
	4 x M1.2x6mm Phillips Head Screw M1260PSS
	4 x M1.4x3mm Phillips Head Screw M1430PSS
	4 x M1.4x4mm Phillips Head Screw M1440PSS
	4 x M1.4x6mm Phillips Head Screw M1460PSS
	9 x M1.6x3mm Phillips Head Screw M1630PSS
	6 x M1.6x4mm Phillips Head Screw M1640PSS
	5 x M1.6x6mm Phillips Head Screw M1660PSS
	2 x M2x8mm Phillips Head Screw M2080PSS
	2 x M2x8mm Countersunk Head Screw M2080CKS

	Features
	Very strong & light
	Keeps the Microheli Frame 130 X very close to the Motor, to maintain stock flying characteristics
	Will give you the confidence needed for worry free flying
	Self tightening while the Motor is powered
	Installation is quick & simple. No modifications necessary

	Weight
	5.68g

	Usage
	For Microheli Frames 130 X Upgrades: MH-130X005 & MH-130X005S series, MH-130X005X & MH-130X005XS series, MH-130X005XZ, MH-130X105XZ

	Requires
	Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly