Aluminum Swashplate w/ Anti-Rotation Guide (RED) - BLADE 200 SRX

The Aluminum Swashplate with Anti-Rotation Guide is specifically designed for improvements in stability, durability and overall performance on the Blade 200 SR X helicopter.
This combo is machined with precise CNC tolerances from Aluminum to gain the best precision together with Stainless Steel Anti-Rotation Pin, Stainless Steel Ball Linkages, Aluminum Anti-Rotation Bracket and Delrin slide trench of Anti-Rotation Bushing to prevent wear and tear for long time use. This combo is directly replaced the stock plastic swashplate system.
In addition, the high quality selected Radial Bearing is utilized to minimize any unwanted slops and plays between upper swash and lower swash. More than that, the Aluminum Swashplate is technically re-engineered center ball in line with swash arm balls to allow the Swashplate tilting linearly and precisely which produces the most accurate and fast cyclic response and cyclic power on Blade 200 SR X flybarless head system.
The Aluminum Swashplate is thin profile, more tilt angle (15 degrees) than the stock plastic swashplate (only 14 degrees) and all optimized for weight 4.37g (only 0.98g heavier than stock plastic swashplate).
*Microheli Aluminum Swashplate system design is optimized: The Anti-Rotation Pin 1.8- and the slide trench of Anti-Rotation Bushing 1.8+ for maximum precision, no more vibe or loosening.
*The stock plastic Swashplate system design: The Anti-Rotation Pin 1.8 and the slide trench of Anti-Rotation Bushing 2.1 which cause vibe or loosening easily.
Just add the Aluminum Swashplate with Anti-Rotation Guide, you now have a complete combo with the highest precision Anti-Rotation Pin and slide trench of Anti-Rotation Bushing design for optimal flight performance, without moving left or right when the Swashplate goes up-n-down to the Shaft direction.

	Includes
	1 x Aluminum Swashplate MH-2SRX112
	1 x Anti-Rotation Guide MH-2SRX111
	Hardwares

	Materials
	Aluminum
	Stainless Steel

	Features
	100% CNC machined from Aluminum, Stainless Steel and Delrin
	Specifically designed for improvements in stability, durability and overall performance on the Blade 200 SR X helicopter
	Machined with precise CNC tolerances from Aluminum to gain the best precision together with Stainless Steel Anti-Rotation Pin, Stainless Steel Ball Linkages, Aluminum Anti-Rotation Bracket and Delrin slide trench of Anti-Rotation Bushing to prevent wear and tear for long time use
	The high quality selected Radial Bearing is utilized to minimize any unwanted slops and plays between upper swash and lower swash
	Technically re-engineered center ball in line with swash arm balls to allow the Swashplate tilting linearly and precisely which produces the most accurate and fast cyclic response and cyclic power on Blade 200 SR X flybarless head system
	Thin profile, more tilt angle
	Optimized for the Anti-Rotation Pin 1.8- and the slide trench of Anti-Rotation Bushing 1.8+ for maximum precision, no more vibe or loosening
	Unique and stylish Aluminum Swashplate with Anti-Rotation Guide design

	Weight
	5.24g

	Usage
	For Blade 200 SR X

	Requires
	Read and follow carefully the Assembly Instruction
	Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly
	Tools

	Instruction
	Manual and Instruction included