Grid View:
 

Microheli 12x18x4 Radial Bearing

MR6071ZZ
(0)
$7.99

..

 

Microheli 4x9x4 Radial Bearing

684ZZ
(0)
$3.99

..

 

Microheli Adjustable Tail Motor Mount w/ Fin Set (GOLD) - OMP Hobby M2 V2 / EXP / EVO

MH-M2EV225
(0)
$19.99

The Adjustable Tail Motor Mount is specifically designed and optimized for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V2 / EXP / EVO helicopter.With this Tail Motor Mount you can stretch out 4mm or 8mm longer for more flying experience on your heli.Included:1 x Aluminum Tail Motor..

 

Microheli Adjustable Tail Motor Mount w/ Fin Set (RED) - OMP Hobby M2 V2 / EXP / EVO

MH-M2EV125
(0)
$19.99

The Adjustable Tail Motor Mount is specifically designed and optimized for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V2 / EXP / EVO helicopter.With this Tail Motor Mount you can stretch out 4mm or 8mm longer for more flying experience on your heli.Included:1 x Aluminum Tail Motor..

 

Microheli Adjustable Tail Motor Mount w/ Fin Set - OMP Hobby M2 V2 / EXP / EVO

MH-M2EV025
(0)
$19.99

The Adjustable Tail Motor Mount is specifically designed and optimized for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V2 / EXP / EVO helicopter.With this Tail Motor Mount you can stretch out 4mm or 8mm longer for more flying experience on your heli.Included:1 x Aluminum Tail Motor..

 

Microheli Airbrush Carbon Fiber King Cobra Canopy - OMP Hobby M2 V2 / EXP

MH-OM2100KC
(0)
$38.99

The Airbrush Carbon Fiber King Cobra Canopy design creates the hottest overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from Airbrush Fiberglass. It is used for the stock frame. Just lift up the front of canopy and easy to change..

 
 
 
 
 
Back Order

Microheli Airbrush Fiberglass EC145 Scale - OMP Hobby M2 / EVO

MH-M2EV-SE11
(0)
$139.99

The Airbrush Fiberglass EC145 Scale design creates a super sharp overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP / EVO helicopter, but also significantly aids in high visibility from airbrush fiberglass shell. Included:1 x Airbrush Fiberglass EC145 Scale1 x Landing Gear1 x Aluminum..

 
 
Back Order
 

Microheli Airbrush Fiberglass Green Scratch Fuselage - OMP Hobby M2 V2 / EXP

MH-M2EX-FLGS
(0)
$54.99

The Airbrush Fiberglass Green Scratch Fuselage set design creates the hottest overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from Airbrush Fiberglass. It can be used for both stock frame and MICROHELI frame. See and feel the..

 
 
 
Back Order

Microheli Airbrush Fiberglass Hughes 300 Scale /w Landing Gear (OR) - OMP Hobby M2 V2 / EXP

MH-M2EX-SH32
(0)
$79.99

The Airbrush Fiberglass Hughes 300 Scale design creates a super sharp overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from airbrush fiberglass shell.   Included: 1 x Airbrush Fiberglass Hughes 300 Scale 2 x Aluminum ..

 
Back Order

Microheli Airbrush Fiberglass Hughes 300 Scale /w Landing Gear (WT) - OMP Hobby M2 V2 / EXP

MH-M2EX-SH33
(0)
$79.99

The Airbrush Fiberglass Hughes 300 Scale design creates a super sharp overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from airbrush fiberglass shell.   Included: 1 x Airbrush Fiberglass Hughes 300 Scale 2 x Aluminum ..

 

Microheli Airbrush Fiberglass King Cobra Canopy (OR) - OMP Hobby M2 EVO

MH-M2EV080KCO
(0)
$34.99

The Airbrush Fiberglass King Cobra Canopy design creates the hottest overall appearance, which not only adds a cool new look to your OMP Hobby M2 EVO helicopter, but also significantly aids in high visibility from Airbrush Fiberglass. It is used for the stock frame. Just lift up the front of canopy and easy to change batter..

 

Microheli Airbrush Fiberglass King Cobra Canopy (WT) - OMP Hobby M2 EVO

MH-M2EV080KCW
(0)
$34.99

The Airbrush Fiberglass King Cobra Canopy design creates the hottest overall appearance, which not only adds a cool new look to your OMP Hobby M2 EVO helicopter, but also significantly aids in high visibility from Airbrush Fiberglass. It is used for the stock frame. Just lift up the front of canopy and easy to change batter..

 

Microheli Airbrush Fiberglass King Cobra Canopy (WT) - OMP Hobby M2 V2 / EXP

MH-OM2080KCW
(0)
$34.99

The Airbrush Fiberglass King Cobra Canopy design creates the hottest overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from Airbrush Fiberglass. It is used for the stock frame. Just lift up the front of canopy and easy to change b..

 

Microheli Airbrush Fiberglass King Cobra Canopy - OMP Hobby M2 EVO

MH-M2EV080KC
(0)
$34.99

The Airbrush Fiberglass King Cobra Canopy design creates the hottest overall appearance, which not only adds a cool new look to your OMP Hobby M2 EVO helicopter, but also significantly aids in high visibility from Airbrush Fiberglass. It is used for the stock frame. Just lift up the front of canopy and easy to change batter..

 
 
Back Order
 
 
 

Microheli Aluminum Canopy Mount Set (GOLD) - OMP HOBBY M1 / EVO

MH-OMM1205CM
(0)
$8.99

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1      ..

 
 

Microheli Aluminum Canopy Mount Set (RED) - OMP HOBBY M1

MH-OMM1105CM
(0)
$8.99

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1      ..

 
 

Microheli Aluminum Canopy Mount Set - OMP HOBBY M1 / EVO

MH-OMM1005CM
(0)
$8.99

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1      ..

 
 

Microheli Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set (GOLD) - OMP Hobby M1 / EVO

MH-OMM1225
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for ..

 

Microheli Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set (RED) - OMP Hobby M1

MH-OMM1125
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools &nb..

 
Back Order

Microheli Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set - OMP Hobby M1

MH-OMM1025
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools &nb..

 
 
 
 

Microheli Aluminum Main Blade Grip w/ Thrust Bearing (GOLD) - OMP Hobby M1

MH-OMM1202
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindl..

 

Microheli Aluminum Main Blade Grip w/ Thrust Bearing (GOLD) - OMP Hobby M2 V1/V2/EXP

MH-M2EX202
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter. The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and S..

 

Microheli Aluminum Main Blade Grip w/ Thrust Bearing (RED) - OMP Hobby M1

MH-OMM1102
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindl..

 

Microheli Aluminum Main Blade Grip w/ Thrust Bearing (RED) - OMP Hobby M2 V1/V2/EXP

MH-M2EX102
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter. The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and S..

 

Microheli Aluminum Main Blade Grip w/ Thrust Bearing - OMP Hobby M1

MH-OMM1002
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindl..

 

Microheli Aluminum Main Blade Grip w/ Thrust Bearing - OMP Hobby M2 V1/V2/EXP

MH-M2EX002
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter. The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and S..

 

Microheli Aluminum Tail Motor Mount (for MH-OMM1025 - OMP Hobby M1)

MH-OMM1025TM
(0)
$12.99

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1025   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools   Instruction: ..

 

Microheli Aluminum Tail Motor Mount (GOLD) (for MH-OMM1225 - OMP Hobby M1/EVO)

MH-OMM1225TM
(0)
$12.99

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1225   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution ..

 

Microheli Aluminum Tail Motor Mount (RED)(for MH-OMM1125 - OMP Hobby M1)

MH-OMM1125TM
(0)
$12.99

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1125   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools   Instruction: ..

 
Showing 1 to 48 of 240 (5 Pages)